MULTIWIICONF DOWNLOAD FREE

MultiWiiConf is a handy third-party software solution that was designed to help advanced computer users build radio-controlled flying devices by providing them with the "brain" of the flying RC-controlled platform that has multiple rotors. The GUI shows in the upper right the state of the receiver inputs. The only requirement that needs to be met in order for this application to run is that the receiver any standard receiver would do has to have a minimum of four RC channels. If the channel in the GUI responds opposite from the transmitter stick then you need to go into your transmitter menu and reverse that channel. Maybe the most famous setup in this case is the combination of an Arduino pro mini board and a Wii Motion Plus expansion device.

Uploader:	Shakashicage
Date Added:	5 July 2005
File Size:	31.2 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	98364
Price:	Free* [*Free Regsitration Required]

If the board's firmware was not properly configured in the Firmware Config Tool then the sensors may malfunction. Maybe the most famous setup in this case is multieiiconf combination of an Arduino pro mini board and a Wii Motion Plus expansion device.

Download MultiWiiConf

If the channel in the GUI responds opposite from the transmitter stick then you need to go into your transmitter menu multiwiiconc reverse that channel. From the location you unpacked the files open the application. If you wish you can copy this folder into your normal applications folder where your other apps are located or you can simply run from the unpacked folder.

With receiver inputs responding you can check the channel polarity and range. It automatically downloads the correct version matching your Quadrino's firmware version, and it also configures an icon in your Start All Programs under Quadrino Tools. Ideally there should be zero I2C errors.

Proper ranges on each channel is also very important. You need to set these values in your transmitter if they are off using a combination of Expo or Trim settings. The GUI shows in the upper right the state of the receiver inputs.

Compiling MultiWiiConf on MacOS X

There are many command gestures for operating the copter which may not work if any channel does not go lower than or higher than Refer back to the Quick Start Guidebut you will probably want to:. As per the readme. What's new in MultiWiiConf 2. It is highly compatible with a wide variety of sensors, which makes it very easy to apply its functionality to several devices that might be in need of such an RC brain to operate accordingly.

With data streaming in you can now move the Quadrino around in space and see the GUI's indicators and sensors react.

MultiWiiConf

Now is a good time to check that your receiver is operational and the ranges multiwiicojf each channel is correct. This is the most common cause of the copter not arming and flying because the ARM gesture throttle down, yaw right isn't recognized due to narrow channel ranges in the transmitter. If the values are locked on then you should check your wiring and receiver module power as the Quadrino is not getting valid signals.

MultiWiiConf is capable of controlling up to four 50Hz servo devices at the same time, making it a highly reliable software assistant.

The channel in the GUI should respond the same as the transmitter stick. That means that you can also run it from removable storage media such as USB flash drives or external HDDs or SSDs without fearing that it might modify your Windows registry entries or create additional content on your PC without your consent.

The green arrow shows the front of the copter. This data isn't that useful unless you are very familiar with accellerometer, gyro and other sensors but you should at least see these values react to you moving the board. MultiWiiConf is a handy third-party software solution that was designed multiwiicond help advanced computer users build radio-controlled flying devices by providing them with the "brain" of the multiwicionf RC-controlled platform that has multiple rotors.

On the bottom right are the typical plane attitude roll and pitch and heading indicators which should be quite familiar. In the rare case, a Quadrino get's a wrong label so if the problem persists contact support and we will help multiiwiiconf out.

Once data from the board begins to stream you should also hit the READ button since many of the settings in the GUI will remain red and unpopulated until you do.

The 3D view of the copter is from the TOP. So if you move the stick left, then the channel in the GUI should respond by going left. Also, if you added the GPS option in the firmware a missing GPS will cause I2C errors to climb even though the sensors and flight control will continue to operate fine.

I've never needed to do this, but if the application won't start give this a try. If you use your serial on page 2 of the tool then it will use our manufacturing database to lookup your sensor configuration.

Installing this application on the target computer isn't necessary, since the program is completely portable. The only requirement that needs to be met in order for this application to run is multiwiiiconf the receiver any standard receiver would do has to have a minimum of four RC channels. May 4, GPLv3.